- Max. turning dia: 280 mm
- Max. turning length: 550 mm
- Max. Workpiece weight: 350 kg
- Max.output S1 / S6 - 40%: 22/33 kW
- Max. turning dia: 550 mm
- Max. turning length: 2 500 mm
- Max. Workpiece weight: 1 100 Kg
- Max.output S1 / S6 - 40%: 28 / 42 kW
- Max. turning dia: 340 mm
- Max. turning length: 550 mm
- Max.output S1 / S6 - 40%: 21 / 27 kW
- Bed structure – 60° from horizontal surface
- Electrical spindle A6 (Siemens)
- Tool head (SAUTER VDI 40)
- Linear guide (Schneeberger size 35)
- Ball screws (NSK) - with nut cooling capability
- Hydraulic cylinder of the tailstock with admeasuring – setting the pressure on the control panel
- Possibility of using a ball screw with the tailstock – by reason of minimum clamping force
- Components spreading heat and noise placed in the rear of the machine
- Hydraulic unit with proportional valves – setting the pressure on the control panel
- Setting the position of the chuck jaws on the control panel
- Ball screw drives without a gear (motor, clutch, ball screw), ball screws used with lower pitch by reason of securing higher positioning precision
- Max. turning diameter: 550 mm
- Max. turning length: 1 100 mm
- Main spindle output S1: 22 kW
- Chucks A8: SMW Autoblok BH-D 315, BH-D 400, BB-D 250, KNCS-N 325-104
- Automatic electric sliding of the working space cover
- Collet clamping
- Oil mist and aerosol extraction from the tool working space
- Spindle arrest
- Removable tool probe
- Manual working space rinsing
- Removable steady on a common guide with the machine tailstock (clamping range 25-165 [mm])
- Manual airblast
- Tool cooling - 7 or 17 (bar)
- Fixed tailstock centre Mo5
- Machine condition signalling
GraBa Tech Asia Pacific Pte Ltd
25 International Business Park
Singapore ( 609916 )
Phone +65 84 89 0 887
Mobile +49 151 223 66 864
info@igrabatech.com
